Six step cleaning process to achieve the best clean results possible:

1: We inspect your floor before the cleaning process This is to identify any limitations like stain removal, loose grout, surrounding surfaces sensitive to cleaning solutions and any other areas that need consideration before the cleaning starts. 2: We Protect Your Walls and Furniture This is to limit over spray on to sensitive areas during the cleaning process. 3: Agitation This is done by means of a rotary cleaning machine or by hand depending on the areas to be cleaned. 4: Rinse Slurry (Dirt from the floor and cleaning solution mixed together) with our pressurised cleaning equipment.  5: Drying can take up to 12- 24 hours. 6: Impregnator Sealer The Impregnator penetrates below the surface of the stone to protect the floor from ingrained soils spills etc. or a topical coating sealer that will seat on surface of the stone tiles that gives the best protection you can get, and also leaves a glossy shinning affect on floor, and your floor will be like bullet proof to the dirty and any spills will not penetrate through it.